Máy lọc dầu máy biến áp là một trong những loại máy chủ yếu trong các hệ thống điện và hệ thống truyền tải điện. Nó có ý nghĩa quyết định tới tính kinh tế của chúng ta, khi mà mỗi kw công suất của nguồn điện thì ta cần công suất máy biến áp tới khoảng 5 -6 KVA. Và trong các nhà máy chiếm tới 30% toàn bộ tổn thất điện năng trong các lưới điện.
Chức năng
Dễ sử dụng
Loại bỏ dễ dàng nhũ tương hóa và khử khí hòa tan để độ ẩm dưới 5 ppm
Giảm đáng kể khí dễ cháy và Oxy
Phục hồi hoàn toàn sức mạnh điện môi
Hitech quốc tế chuyên cung cấp các loại Máy lọc dầu máy biến áp với giá tốt nhất và chất lượng vượt trội
sau đây chúng tôi xin giới thiệu đến quý khách hàng một vài sản phẩm có kết cấu khác nhau cho khách hàng dễ dàng lựa chọn:
Máy lọc dầu biến áp HTI- U DOUBLEBLOCKS
Present fabrication distinguishes by the doubleblock framework containing:
- heating and filtering block BNF;
- sorbent-filled cartridges block CP .
The given framework enables optimal oil processing regarding necessity for heating and filtration of the oil
to obtain established parameters. Oil heating and filtration are followed by its processing by sorbents. The
framework also enables separate operation of both blocks.
Heating and filtering block BNF
Máy lọc dầu biến áp HTI- U DOUBLEBLOCKS
Technical parameters
Value for the BNF block of the
sample
МCU-1,7 МCU-4,3
Capacity, m3/h, more:
- in the drying, regenerating and filtering modes 1,7 4,3
- in the heating mode 1,7 4,3
Maximum temperature of outlet oil in the heating mode, °С 60
Parameters of processed oil:
- industrial purity range (ISO 4406), after 9 (-/15/12)
- mechanical contaminants content, g/t, less 2,5
Nominal filtration fineness, mkm 5...25
Maximum power consumption, kWt 33
Power voltage for the three-phased alternating current of 50/60 Hz, V 380/220
Overall dimensions, mm, less (length/width/height) 1270/700/ 1400 1270/700/ 1500
Mass, kg, less 500 550
Máy lọc dầu biến áp HTI-4F
СММ-F units are designed for diesel fuel as well as for transformer, fluid, industrial oils purification of
mechanical contaminants, free and dissolved water, water-soluble acids and alkali of less 70 cSt viscosity for
the temperature of 50 °С .
Especial adsorbing filters enable purification aiming self-regulation during the steady oil processing. Self-
regulation of purification process is being carried out respective of fluid flow parameters.
Máy lọc dầu biến áp HTI-4F
The filter had undergone the regeneration which enabled its frequentative exploitation. Present fabrication
can be exploited while assembling, maintaining and exploiting oil-filled equipment.
Oil mobile units СММ – F are divided into two categories according to the mounted filter cartridges:
- СММ-F (CFU) – mounted filter cartridge releases of mechanical contaminants only;
- СММ-F–mounted cartridge filter releases of mechanical contaminants as well as of free and dissolved water
Technical parameters
Value for the sample
СММ-0,6F СММ-4F
Capacity, m3/h, more: 0,6 4
Operating temperature of the oil, °С 30-60
Maximum operating pressure, mPа 0,3
Máy lọc dầu biến áp HTI-4F
Parameters of processed oil:
- industrial purity range (ISO 4406), after 9 (-/12/15)
- water release rate, % 93...97
- mechanical contaminants release rate, % 92...97
Nominal filtration fineness, mkm 3...5
Maximum power consumption, kWt 16 3
Power voltage for the three-phased alternating current of 50/60 Hz, V 380/220
Overall dimensions, mm, less (length/width/height) 1100/700/1300 2000/800/1500
Mass, kg, less 300 600
- Máy lọc dầu biến áp HIT- BF
Máy lọc dầu biến áp HTI - BF
The СММ-F unit (block of filtration-BF) is designed for diesel fuel as well as for transformer,
industrial oils purification of mechanical contaminants. Viscosity of aforementioned contaminants should be
less 70 cSt for the temperature of 50°С.
The unit enables oil purification after the 9-th range of industrial purity (-/15/12 by ISO 4406) by means of
output running over the filtering unit for several times. Present fabrication is the stationery unit containing no
pumps which it can be accommodated with if previously approved by the manufacturer.
Technical parameters Value for the sample BF-10
Máy lọc dầu biến áp HTI - BF
Transmission capacity, m3/h, more 10
Operating temperature of the oil, °С 30-60
Maximum operating pressure, mPа, less 0,6
Parameters of processed oil:
- industrial purity range (ISO 4406), after 9 (-/15/12)
- mechanical contaminants release rate, % 92...97
Nominal filtration fineness, mkm 5...25
Overall dimensions, mm, less (length/width/height) 780/680/ 1080
Mass, kg 200
Quý khách có thể truy cập website để xem thêm nhiều mẫu sản phẩm khác nữa:
- Máy lọc dầu biến áp HTI - 4B
http://thietbihitech.vn/detail/may-loc-dau-bien-ap-hti--4b-1148.html
- Máy lọc dầu cho máy biến áp SMM - 1,0 - 1,7 - 2,2 - 4,0
http://thietbihitech.vn/detail/may-loc-dau-cho-may-bien-ap-smm--10--17--22--40-595.html
Hãy nhấc máy liên hệ ngay với chúng tôi để có sản phẩm và giá ưu đãi nhất
Hotline: 0983.122.058
Hoặc gửi yêu cầu về Email: Sale@thietbihitech.vn
Cam kết giao hàng đúng hẹn và giao hàng trên toàn quốc!