Máy đo lực kéo đứt Mark-10 TSTMH-DC Mark-10 Viet Nam

Công ty TNHH Thương Mại Và Dịch Vụ Tăng Minh Phát (TMP Vietnam) là nhà phân phối của hãng Mark-10 tại thị trường Việt Nam, chuyên về các thiết bị như thiết bị đo lực vặn nắm chai Mark-10, thiết bị đo lực căng Mark-10, thiết bị đo lực nén Mark-10, thiết bị đo momen Mark-10, đồng hồ đo lực căng Mark-10, đồng hồ đo lực nén Mark-10, đồng hồ đo momen xoắn Mark-10, cảm biến đo lực căng lực nén Mark-10, cảm biến đo lực vặn nắp chai Mark-10, thiết bị đo lực cho đầu nối Mark-10,…

Hãy liên hệ với chúng tôi để được hỗ trợ tốt nhất !

Trần Công Lên

Tel: 0906.765.489 – 0914.573.068
Email:  conglen.tmpvietnam@gmail.com
        sale01@tmpvietnam.com

 Advanced Motorized Torque Test Stand Model TSTM-DC / TSTMH-DC

 The TSTM-DC Advanced Motorized Torque Test Stand offers all the mechanical specifications of theTSTM motorized test stand, including standard 100 lbFin (11.5 Nm) torque capacity, versatile modular design, quick engagement and disengagement of samples, fixture mounting plate, stepper motor design that prevents speed variation with load, and more. A 200 lbFin (22 Nm) capacity upgrade is available as an option. The TSTM-DC offers expanded capabilities, including full PC control, programmable angle limits, programmable cycling, auto return, password protection, and other features.

Maximum load  Standard: 100 lbFin [11.5 Nm]  Optional:  200 lbFin [22.0 Nm] Speed range Standard: 0.01 - 15 RPM [0.05 - 90°/s]  Optional:  0.04 - 60 RPM [0.2 - 360°/s] * Speed accuracy  ±0.2% of setting, ±0% variation with load Digital display of angle Programmable angle limits Rotational travel accuracy: ±0.7° / 0.02 rev. Rotational travel repeatability: 0.1° / 0.01 rev. Rotational travel resolution: 0.1° / 0.01 rev. Throat: 4.10" [104 mm] Manual adjustment: 12° / adjustment knob rev Angle dial with 2° resolution Maximum slider travel: 15.5" [394 mm] Slider travel rate: 1.047" [26.6 mm] / lever rev Universal power supply: 80-250 VAC CE mark Computer Control  An RS-232 port is provided to interface with a PC. A command set is provided to allow for full control from a PC.  The following are required with PC control:  - Model 7i or 5i force/torque indicator (more info) - 09-1162 multi-function cable (see below)  - 09-1056 serial cable (see below) Digital Angle Indication  Rotational travel is indicated in degrees or revolutions, with RS-232 output of angle data. Programmable Angle Limits  The TSTM-DC can stop at or cycle between programmable upper and lower angle limits. Programmable in degrees or revolutions. Overload Protection  Protects the torque sensor against overload (requires a Model 7i or 5i force/torque indicator and 09-1162 multi-function cable). The user programs the desired percentage of full scale of the sensor. Auto-return  The torque table rotates to an angle limit or torque set point (requires a Model 7i or 5i force/torque indicator and 09-1162 cable), stops, and reverses direction at full speed to the other angle limit or torque set point. Cycling / Dwell Time Same as auto-return, but with the ability to program up to 100,000 cycles. Programmable dwell time for upper and lower limits (set independently) can be set up for up to 10,000 seconds. Independent CW and CCW speeds may be programmed. Programmable Button Functions Programmable CW and CCW button functions - momentary motion, maintained motion, or auto. Independent CW and CCW Speeds  Configurable speeds for CW and CCW directions Selectable speed units of measurement (RPM and °/s) Password protection  Prevents unauthorized changes to controller settings.

TSTMH

TSTM

CONTROLLER

Model: