Đang tải dữ liệu ...
Điện máy
Hà Nội
Điện lạnh
Tìm kiếm
E-mail:
Mật khẩu:
   [Đóng]   [Quên mật khẩu?]
Đang tải dữ liệu...
Mua vị trí tin nổi bật tại đây
  • MUA HÀNG AN TOÀN
  • Các mặt hàng hay bị lừa đảo: xích đu, ghế rung, xe tập đi, ghế ăn dặm, máy hút sữa, máy khâu, máy xay bột, bình sữa, các đồ chơi trẻ em....
  • Cần xem kỹ mặt hàng mình cần mua, yêu cầu ảnh chụp thực tế sản phẩm.
  • Không mua những sản phẩm giá quá rẻ so với thị trường.
  • Sử dụng hình thức thanh toán COD( thanh toán khi nhận hàng) để đảm bảo hàng nhận đúng chất lượng.
  • Rất nhiều thành viên đã chuyển tiền nhưng đã không nhận được hàng, hoặc là hàng tầu, hàng kém chất lượng.

Thiết bị phân tích khí M C Techgroup

0962198696
Gửi tin nhắn
Lưu tin

Thời gian đăng

09:20 | 10/10/2019 | Hà Nội

Lượt xem tin

1

Mã tin

29187780

0962198696

Chat với chủ tin

Mua quyền ưu tiên cho tin

Email: lananh.dt@dimovietnam.com

SĐT: 0962 198 696

 

M&C Techgroup

Gas Sample Probes

  1. 000-H, 23 SP20 V 20S2000

heated from 0 to 180 °C, with ceramic filter element outside, optionally: other filter materials, power: 115 V/60 Hz, various possibilities of back-purging and calibration gas feeding, for sooty sample gas, high pressure version

Gas sample probe type SP2000-H with external ceramic filter type S-2K150, filter porosity: 2 µm with electrically heated external filter 0 to 180 °C, adjustable by an integrated thermostat, high temperature limiter with reset key responding at +30 °C Tset and low temperature alarm with potential-free status-alarm contact at -30°C below Tset, incl. weather protection shield with insulation, power: 230 V/50 Hz, 800 W, mounting flange: DN 65 PN 6B with G 3/4" i connection, sample gas OUT: 1/4" NPT i, material: SS 316Ti, ceramic, Viton

  1. SP2300-H, 230 V 20S3000

heated from 0 to 180 °C, with ceramic filter element outside, material: PTFE, optionally: other filter materials, power: 115 V/60 Hz

Gas sample probe type SP2300-H, all gas-bearing parts are made of PTFE, with external ceramic filter type S-2K150, filter porosity: 2 µm, with electrically heated external filter from 0 to 180 °C, adjustable by an integrated thermostat, high temperature limiter with reset key responding at +30 °C Tset and low temperature alarm with potential-free status-alarm contact at -30 °C below Tset, incl. weather protection shield with insulation, power: 230 V/50 Hz, 800 W, mounting flange: DN 65 PN 6B with G 3/4" i connection, material: Viton, ceramic, PTFE glass-fiber reinforced, PEEK

  1. SP2400-H, 230 V 20S3500

       heated from 0 to 180 °C, with ceramic filter element, material: titanium, optionally: other filter materials,    power: 115 V/60 Hz

Gas sample probe type SP2400-H, all gas-bearing parts are made out of titanium, with external ceramic filter type S-2K150, filter porosity: 2 µm, with electrically heated external filter 0 to 180°C, adjustable by an integrated thermostat, high temperature limiter with reset key responding at +30 °C Tset and low temperature alarm with potential-free status-alarm contact at -30 °C below Tset, incl. weather protection shield with insulation, power: 230 V/50 Hz, 800 W, mounting flange: DN 65 PN 6B with G 3/4" i connection, incl. flange seal and screws, material: Viton, ceramic, titanium

  1. SP2200-H/C/I/BB, 230 V 20S2010

       heated from 0 to 180 °C, with ceramic filter element outside, with integrated back-purging, calibration gas     feeding and shut-off possibility of the sample gas outlet, optionally: other filter materials

Gas sample probe type SP2200-H/C/I/BB with external ceramic filter type S-2K150, filter porosity: 2 µm, with electrically heated external filter 0 to 180 °C, adjustable by an integrated thermostat, high temperature limiter with reset key responding at +30 °C Tset and low temperature alarm with potential-free status-alarm contact at -30 °C below Tset, with calibrating, isolating and flushback valve, incl. weather protection shield with insulation, power: 230 V/50 Hz, 800 W, mounting flange: DN 65 PN 6B with G 3/4" i connection, sample gas OUT: 1/4" NPT i, material: SS 316Ti, ceramic, Viton

  1. SP2500-H, 230 V 20S3510

       heated from 0 to 180 °C, with ceramic filter element outside and removable pre-filter, optionally: other filter materials, power: 115 V/60 Hz, various possibilities of back-purging and calibration gas feeding

Gas sample probe type SP2500-H with external ceramic filter type S-2K150, filter porosity: 2 µm, sample tube or pre-filter retractable through the sample probe head, i ncluding 2 rotatable protection plates at the probe head, wi th electrically heated external filter 0 to180°C, adjustable by an integrated thermostat, high temperature limiter with reset key responding at +30 °C Tset and low temperature alarm with potential-free status-alarm contact at -30 °C below Tset, incl. weather protection shield with insulation, sample gas outlet: 1/4" NPT i, power: 230 V/50 Hz, 800 W, mounting flange: DN 65 PN 6B, sample tube connection G 3/4" i, material: SS 316Ti, Viton, ceramic

  1. SP2500-H, 230 V 20S3510

       heated from 0 to 180 °C, with ceramic filter element outside and removable pre-filter, optionally: other filter materials, power: 115 V/60 Hz, various possibilities of back-purging and calibration gas feeding

Gas sample probe type SP2500-H with external ceramic filter type S-2K150, filter porosity: 2 µm, sample tube or pre-filter retractable through the sample probe head, i ncluding 2 rotatable protection plates at the probe head, wi th electrically heated external filter 0 to180°C, adjustable by an integrated thermostat, high temperature limiter with reset key responding at +30 °C Tset and low temperature alarm with potential-free status-alarm contact at -30 °C below Tset, incl. weather protection shield with insulation, sample gas outlet: 1/4" NPT i, power: 230 V/50 Hz, 800 W, mounting flange: DN 65 PN 6B, sample tube connection G 3/4" i, material: SS 316Ti, Viton, ceramic

  1. SP2200-H/C/I/BB, 230 V 20S2010

       heated from 0 to 180 °C, with ceramic filter element outside, with integrated back-purging, calibration gas feeding and shut-off possibility of the sample gas outlet, optionally: other filter materials

Gas sample probe type SP2200-H/C/I/BB with external ceramic filter type S-2K150, filter porosity: 2 µm, with electrically heated external filter 0 to 180 °C, adjustable by an integrated thermostat, high temperature limiter with reset key responding at +30 °C Tset and low temperature alarm with potential-free status-alarm contact at -30 °C below Tset, with calibrating, isolating and flushback valve, incl. weather protection shield with insulation, power: 230 V/50 Hz, 800 W, mounting flange: DN 65 PN 6B with G 3/4" i connection, sample gas OUT: 1/4" NPT i, material: SS 316Ti, ceramic, Viton

  1. SP2000-H320/S, 230 V 20S5000

       heated from 0 to 320 °C, with ceramic filter element outside, power: 230 V/50 Hz or 115 V/60 Hz for high-temperature sampling with pre-separator, (e.g. downstream DeNOx plant)

Sample probe type SP2000-H320/S with external ceramic filter type S-2K150, filter porosity: 2 µm, filter element seal and cover seal out of graphite, electrically heated external filter 0 to 320 °C adjustable by an integrated thermostat, high temperature limiter with reset key responding at +30 °C above Tset and low temperature alarm with potential-free status-alarm contact at -30 °C below Tset, incl. weather protection shield with insulation, mounting flange: DN 65 PN 6B with G 3/4" i connection, incl. flange gasket and screws, pre-separator out of glass/Hastelloy with peristaltic pump SR25.1, mounted on a mounting plate out of aluminium, material: SS 316Ti, ceramics, graphite, glass, PVDF, PTFE, Hastelloy, calibration gas connection: 6 mm tube with plug, sample outlet: GL 18-8 with PVDF connector for tube DN 4/6, power: 230 V/50 Hz, 800 W

  1. SP2000-H320/S, 115V 20S5000

heated from 0 to 320 °C, with ceramic filter element outside, power: 230 V/50 Hz or 115 V/60 Hz for high-temperature sampling with pre-separator, (e.g. downstream DeNOx plant)

Sample Probe type SP2000-H320/S with external ceramic filter type S-2K150, filter porosity: 2 µm, filter element seal and cover seal out of graphite, electrically heated external filter 0 to 320°C adjustable by an integrated thermostat, high htemperature limiter with reset key responding at +30 °C above Tset and low temperature alarm with potential-free status-alarm contact at -30 °C below Tset, incl. weather protection shield with insulation, mounting flange: 3" ANSI with G 3/4" i connection, incl. flange gasket and screws, pre-separator out of glass/hastelloy, peristaltic pump SR25.1, mounted on a base plate out of aluminium, material: SS 316Ti, ceramics, graphite, glass, PVDF, PTFE, calibration gas connection: 6 mm tube with plug, sample gas outlet: GL 18-8 with PVDF connector for tube DN 4/6, power: 115 V/60 Hz, 800 W

  1. SP2000-H320/S, 230 V 20S5000

heated from 0 to 320 °C, with ceramic filter element outside, power: 230 V/50 Hz or 115 V/60 Hz for high-temperature sampling with pre-separator, (e.g. downstream DeNOx plant

Sample probe type SP2000-H320/S with external ceramic filter type S-2K150, filter porosity: 2 µm, filter element seal and cover seal out of graphite, electrically heated external filter 0 to 320 °C adjustable by an integrated thermostat, high temperature limiter with reset key responding at +30 °C above Tset and low temperature alarm with potential-free status-alarm contact at -30 °C below Tset, incl. weather protection shield with insulation, mounting flange: DN 65 PN 6B with G 3/4" i connection, incl. flange gasket and screws, pre-separator out of glass/Hastelloy with peristaltic pump SR25.1, mounted on a mounting plate out of aluminium, material: SS 316Ti, ceramics, graphite, glass, PVDF, PTFE, Hastelloy, calibration gas connection: 6 mm tube with plug, sample outlet: GL 18-8 with PVDF connector for tube DN 4/6, power: 230 V/50 Hz, 800 W

  1. SP180-H 02S1800

       heated to 180 °C, with short ceramic filter element outside and weather-proof protection shield, power: 110 V-240 V, 50/60 Hz, possibility of calibration gas feeding

Gas sample probe type SP180-H with external ceramic filter element type S-2K (75 mm), filter porosity: 2 µm, external filter electrically heated up to 180 °C with self-regulating heating elements, low temperature alarm with potential-free contact output at -20 °C below Tset, including innovative weather protection shield for outdoor use, power: 110 V-240 V, 50/60 Hz, 400 W, mounting flange: DN 65 PN 6B with connection thread G 3/4" i, material: SS 316Ti, SS 316L, Viton, ceramics, connection: sample gas outlet: tube screw fitting DN 4/6, calibration gas connection: tube screw fitting DN 4/6 with blank cap

  1. SP210-H 02S1000

       heated to 180 °C, with short ceramic filter element outside, power: 110 V-240 V, 50/60 Hz, optionally: possibility of calibration gas feeding

Gas sample probe type SP210-H with external ceramic filter type S-2K (75 mm), filter porosity: 2 µm, electrically heating of the external filter up to 180 °C with self-regulating heating elements, undertemperature alarm with potential-free status-alarm contact at -20 °C below T\fs12 set , power: 110-240 V/50-60 Hz, 200 W, mounting flange: DN65PN6 with thread G 3/4" i, material: SS 316 Ti, ceramic, Viton

  1. HEX5-1.08, ZONE 2, 240 V, EXTRA CHARGE 20S9650

       regulated Ex heater for sample probe type SP3200 for use in Ex zone 2 G/D and Class I DIV 2 Groups A,B,C,D

Extra charge for Ex heater type HEX 5-1.08, explosion-proof version for Ex zone 2 with protection class according to ATEX: EXAM BVS 09 ATEX 107, IECEx BVS 16.0025, II 3 G Ex ec nC IIC temperature class T5 bis T2 Gc, II 3 D Ex tc IIIC T 75 °C bis 235 °C Dc \cf0 and additionally acc. to: FM Class I, DIV 2, A/B/C/D CSA, temperature sensor PT100 and temperature controller 70304 in a housing, max. ambient temperature 50 °C, power: 240 V, 50/60 Hz, 830 W\fs16 , p lease indicate the additional item number (20S9608 - 20S9618) for temperature class T2 - T5 when ordering

  1. HEX5-2.08, ZONE 2, 240 V, EXTRA CHARGE 20S9655

regulated Ex heater for sample probe type SP3200 for use in Ex zone 2 G/D and Class I DIV 2 Groups A,B,C,D

Extra charge for Ex-heater type HEX 5-2.08. Explosion-proof version for Ex-Zone 2 with protection class according to ATEX: EXAM BVS 09 ATEX 107IECEx BVS 16.0025 II 3 G Ex ec nC IIC temperature classT5 bis T2 Gc \cf0 \cf1 II 3 D Ex tc IIIC T 75 °C to 235 °C Dc\cf0 and additional acc. to: FM Class I, DIV 2, A/B/C/D CSA. Temperature sensor PT100 and temp.-controller 70304 in a housing separate mounting. Max ambient temp. 50°C. Power: 240V,50/60Hz,830W. Please indicate the additional part number (20S9608 - 20S9618) for the temperature class T2 - T5 with the order.

  1. SP3000/EX, ZONE 20/21 20S5500

for sampling from zones with explosive dust, stainless steel filter element outside, optionally: heating, back-purging and pre-filter (necessary)

Sample probe type SP3000/Ex incl. weather protection shield with insulation, explosion-proof version for mounting in Ex-zone 1/2 and 21/22 sampling from Ex-zone 20/21/22 with protection class according to ATEX, Ex II 1 D / 2 GD EXAM BVS 04 ATEX H 045 X, filter element type S-3SS150 made of stainless steel, filter porosity: 3 µm, filter element seal out of graphite and cover seal out of graphite, flange DN 65 PN 6, ex-approval only with pre-filter series V12/V20 with integrated volume displacer (not included in the standard version)

  1. SP3000/EX, ZONE 20/21 20S5500

for sampling from zones with explosive dust, stainless steel filter element outside, optionally: heating, back-purging and pre-filter (necessary)

Sample probe type SP3000/Ex incl. weather protection shield with insulation, explosion-proof version for mounting in Ex-zone 1/2 and 21/22 sampling from Ex-zone 20/21/22 with protection class according to ATEX, Ex II 1 D / 2 GD EXAM BVS 04 ATEX H 045 X, filter element type S-3SS150 made of stainless steel, filter porosity: 3 µm, filter element seal out of graphite and cover seal out of graphite, flange DN 65 PN 6, ex-approval only with pre-filter series V12/V20 with integrated volume displacer (not included in the standard version)

  1. SP2000/SS, PROBE TUBE 20S9065

stainless steel, up to max. 600 °C

Insitu probe tube type SP2000/SS, connection: G 3/4", length: 1 m, material: SS 316Ti, temperature max. : 600 °C

  1. SP2000/PV, PROBE TUBE 20S9070

PVDF, up to max. 90 °C

nsitu probe tube type SP2000/PV, connection: G 3/4", length: 1 m, material: PVDF, PTFE-GV, temperature: max. 90 °C.

  1. SP30-H1.1, FE-CUNI, 0.6 M 02S9023

stainless steel, power: 230/115 V, 50/60 Hz, in different lengths, up to 200 °C resp. max. 550 °C process temperature, in order to avoid condensation between the sample point and probe head

Heated in-situ probe tube SP30-H1.1, electrical heating of the double jacket tube to 0-320 °C, thermocouple Fe-CuNi, mounting flange DN65PNB, including 4 welded-in threaded bolts, flange seal and fixing nuts, connection thread G 3/4" i for mounting the sample tube or pre-filter, length: 0.6 m, operating temperature: max. 550 °C, material: SS 904 L, power: 115 V/230 V, 50/60 Hz, power: 600 W, external temperature controller not included in the standard scope of delivery

  1. SP30-H1.1, FE-CUNI, 1 M 02S9023

stainless steel, power: 230/115 V, 50/60 Hz, in different lengths, up to 200 °C resp. max. 550 °C process temperature, in order to avoid condensation between the sample point and probe head

Heated in-situ probe tube SP30-H1.1, electrical heating of the double jacket tube to 0-320 °C, thermocouple Fe-CuNi, mounting flange DN65PNB, including 4 welded-in threaded bolts, flange seal and fixing nuts, connection thread G 3/4" i for mounting the sample tube or pre-filter, length: 0.6 m, operating temperature: max. 550 °C, material: SS 904 L, power: 115 V/230 V, 50/60 Hz, power: 600 W, external temperature controller not included in the standard scope of delivery

  1. SP2000/V20/HC 20S9085

stainless steel pre-filter, up to max. 600 °C, in different versions

Pre-filter type V20 for SP2000-H, stainless steel filter without volume displacer, length: 220 mm, 46 mm OD, filter porosity: 2 µm, temperature: max. 600 °C, connection: G 3/4", material: SS 316 und 316Ti

 

 

Gas Coolers, Condensate Removal and Separators

  1. Compressor-gas coolers, compact, even für ex-zone 2 02K7500XA ECM-1 WITHOUT HEAT EXCHANGER, 115 V

one or two gas paths, max. flow: 1 x 250 Nl/h or 2 x 150 Nl/h, different materials of heat exchangers, power: 230 V/50 Hz or 115 V/60 Hz - Without heat exchangers! Selection in "Options" –

Compressor gas cooler type ECM-1 in wall-mount panel version, housing depth: 260 mm, prepared for 1 jet-stream heat exchanger with 250 Nl/h, high and low temperature alarm window as well as sample gas dew point adjustable at the integrated electronic controller, factory-set to +5 °C, with 1 contact output, thermometer with digital display: -10/+50 °C, power: 115 V/60 Hz, CSA US

  1. Compressor-gas coolers, compact, even für ex-zone 2 02K7500X ECM-1 WITHOUT HEAT EXCHANGER, 230 V

one or two gas paths, max. flow: 1 x 250 Nl/h or 2 x 150 Nl/h, different materials of heat exchangers, power: 230 V/50 Hz or 115 V/60 Hz - Without heat exchangers! Selection in "Options" –

Compressor gas cooler type ECM-1 in wall-mount enclosure, housing depth: 260 mm, prepared for 1 jet-stream heat exchanger with 250 Nl/h, high and low temperature alarm window as well as sample gas dew point adjustable via the built-in electronic controller, factory-set to +5 °C, with 1 contact output, thermometer with digital display: -10/+50 °C, power: 230 V/50 Hz, CSA US

Lưu tin
Chia sẻ