Đo mức dạng từ tính, model mlg80 - khd engineering
MLG80 Magnetic Level Gauge
(ĐO MỨC TỪ TÍNH MLG80)
Model : MLG80
BRAND : KHD ENGINEERING **
1. Operating principle
* Magnetic level gauges work on the principle of communicating vessels, therefore the level in the measuring chamber will be the same as the level in the vessel. The measuring chamber is fitted with a float, which has a magnet inside. The float with magnet will float on the medium and the magnet in the float will turn the flaps of the indicating rail.
* The float in the measuring tube is standard not pressurized and has no magnetic or mechanical guidance. This construction makes the float less dangerous than a float which is standard pressurized. When necessary Hadro can produce a pressurized float. With the below mentioned process conditions it is possible to select a float which will float on the medium. - Medium - Density - Working pressure - Temperature
2. Customer benefits *:
- Low installation, maintenance, and engineering cost
High visibility
- Safe installation and operation
2 year warranty on Chamber, Float and Indication Assembly
3. Industries served:
Oil and Gas
Petrochemical
Chemical
Power Generation
Water and wastewater treatment
Food and Beverage
Pharmaceutical
Pulp and Paper
Biotech
Semiconductor *
---------------------
4. Dimensions :
5. Specifications:
Connection
From ½” to 2” flange type, JIS, ANSI, DIN rating available; special size on request
Pressure Limited
20 kg/cm² for metal chamber type (Stainless Steel)
Temperature Limited
-20~150°C for metal chamber type (Stainless Steel)
Center to Center Length
min 200mm, maximum 5700mm
Accuracy
±8mm
Indicating Case Material / Protection Class
SS304 / IP66
Indicating Strips Material
SS304
Indicating Float Material
SS316
Specific Gravity
600~2000 kg/m³
Chamber Size
ø60mm
6. ORDERING INFORMATION:
7. PRICE LIST (BẢNG GIÁ) :
* Magnetic Level Gauge Brand : KHD/VIETNAM Model : MLG80 Process Temperature : -20 to 150 degree C Pressure Limited : 10kg/cm2 Protection Class : IP 66 Indicating Strips Material: SS304 Indicating Float Material: SS316 Scale Plate : yes Process connection type : JIS 10K Process connetion size : 1/2" Vent type & size : 1/2" NPT Drain type & size : 1/2" NPT Specific Gravity : Accuracy : 8mm