MLG80 Magnetic Level Gauge *
Model : MLG80-3400mm **
BRAND : KHD ENGINEERING *
Operating principle
Magnetic level gauges work on the principle of communicating vessels, therefore the level in the
measuring chamber will be the same as the level in the vessel. The measuring chamber is fitted with a float, which has a magnet inside. The float with magnet will float on the medium and the magnet in the float will turn the flaps of the indicating rail.
The float in the measuring tube is standard not pressurized and has no magnetic or mechanical
guidance. This construction makes the float less dangerous than a float which is standard pressurized.
When necessary Hadro can produce a pressurized float. With the below mentioned process conditions it is possible to select a float which will float on the medium.
- Medium
- Density
- Working pressure
- Temperature
Customer benefits:
-
- Low installation, maintenance, and engineering cost
- High visibility
- Safe installation and operation
- 2 year warranty on Chamber, Float and Indication Assembly
Industries served:
-
- Oil and Gas
- Petrochemical
- Chemical
- Power Generation
- Water and wastewater treatment
- Food and Beverage
- Pharmaceutical
- Pulp and Paper
- Biotech
- Semiconductor
- --------------
Specifications
|
|
Connection |
From ½” to 2” flange type, JIS, ANSI, DIN rating available; special size on request |
Pressure Limited |
20 kg/cm² for metal chamber type (Stainless Steel) |
Temperature Limited |
-20~150°C for metal chamber type (Stainless Steel) |
Center to Center Length |
min 200mm, maximum 5700mm |
Accuracy |
±8mm |
Indicating Case Material / Protection Class |
SS304 / IP66 |
Indicating Strips Material |
SS304 |
Indicating Float Material |
SS316 |
Specific Gravity |
600~2000 kg/m³ |
Chamber Size |
ø60mm |
ORDERING INFORMATION:
-----------------------