OBR12M-R103-2EP-IO-L - Cảm biến quang điện - Đại lý Pepperl fuchs
Nhà sản xuất: Pepperl Fuchs
Nhà cung cấp: Newskyvn
Model : OBR12M-R103-2EP-IO-L
Tên sản phẩm: Cảm biến quang điện
Liên hệ để được tư vấn hỗ trợ Mr.Thanh:
Email: quangthanh@newskyvn.com
Zalo: 0965.130.856
Đại lý Pepperl Fuchs Việt Nam
Pepperl Fuchs
Product Description |
Laser retroreflective sensor |
General specifications |
Effective detection range |
0 ... 12 m |
Reflector distance |
0.25 ... 12 m |
Threshold detection range |
15 m |
Reference target |
H50 reflector |
Light source |
laser diode |
Light type |
modulated visible red light |
Polarization filter |
yes |
Laser nominal ratings |
|
|
Note |
LASER LIGHT , DO NOT STARE INTO BEAM |
|
Laser class |
1 |
|
Wave length |
680 nm |
|
Beam divergence |
> 5 mrad d63 < 2 mm in the range of 250 mm ... 750 mm |
|
Pulse length |
1.6 µs |
|
Repetition rate |
max. 17.6 kHz |
|
max. pulse energy |
9.6 nJ |
Diameter of the light spot |
approx. 30 mm at a distance of 12 m |
Angle of divergence |
approx. 0.3 ° |
Ambient light limit |
EN 60947-5-2 |
Functional safety related parameters |
MTTFd |
672 a |
Mission Time (TM) |
20 a |
Diagnostic Coverage (DC) |
0 % |
Indicators/operating means |
Operation indicator |
LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode |
Function indicator |
Yellow LED: Permanently lit - light path clear Permanently off - object detected Flashing (4 Hz) - insufficient operating reserve |
Control elements |
Light-on/dark-on changeover switch |
Control elements |
sensitivity adjustment |
Parameterization indicator |
IO link communication: green LED goes out briefly (1 Hz) |
Electrical specifications |
Operating voltage |
10 ... 30 V DC |
Ripple |
max. 10 % |
No-load supply current |
< 20 mA at 24 V supply voltage |
Protection class |
III |
Interface |
Interface type |
IO-Link ( via C/Q = pin 4 ) |
Transfer rate |
COM 2 (38.4 kBaud) |
IO-Link Revision |
1.1 |
Min. cycle time |
2.3 ms |
Process data width |
Process data input 2 Bit Process data output 2 Bit |
SIO mode support |
yes |
Device ID |
0x110205 (1114629) |
Compatible master port type |
A |
Output |
Switching type |
The switching type of the sensor is adjustable. The default setting is: C/Q - BK: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link /Q - WH: NPN normally closed / light-on, PNP normally open / dark-on |
Signal output |
2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected |
Switching voltage |
max. 30 V DC |
Switching current |
max. 100 mA , resistive load |
Usage category |
DC-12 and DC-13 |
Voltage drop |
≤ 1.5 V DC |
Switching frequency |
2000 Hz |
Response time |
250 µs |
Conformity
|
Communication interface |
IEC 61131-9 |
Product standard |
EN 60947-5-2 |
Laser safety |
EN 60825-1:2014 |
Approvals and certificates |
UL approval |
E87056 , cULus Listed , class 2 power supply , type rating 1 |
FDA approval |
IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 |
Ambient conditions |
Ambient temperature |
-40 ... 60 °C (-40 ... 140 °F) , fixed cable -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains |
Storage temperature |
-40 ... 70 °C (-40 ... 158 °F) |
Mechanical specifications |
Housing width |
15 mm |
Housing height |
36.5 mm |
Housing depth |
26.7 mm |
Degree of protection |
IP67 / IP69 / IP69K |
Connection |
2 m fixed cable |
Material |
|
|
Housing |
PC (Polycarbonate) |
|
Optical face |
PMMA |
Mass |
approx. 38 g |
Cable length |
2 m |